Previous Projects

6′ Reclaimed Ontario Barnwood Table we made for a Cambridge, Ontario Home – 42″ deep – Harvest Base: Tapered Skirt Option / Straight 4″x4″ Windbrace Beam Legs – Old Growth Hemlock Threshing Floor Construction – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – www.table.ca

A common concern with a traditional [4 leg] harvest table is that taller people will hit their knees on the skirting. While we use 3″ skirting which will generally clear any knees, an option we offer is a tapered skirt. The legs are bolted into the skirt for stability so we can’t eliminate it completely, but this allows for maximum clearance. We did this for this Cambridge harvest table project: Continue reading →

111″ Wide Ontario Barnwood Hutch we made for a Torrance cotage – 107″ 7/8″ height – 16″ deep – Centre 45″ wide / 18″ deep – Outside units proportionally sized – Reclaimed old growth hemlock threshing floor + grainery board construction – Original edges + distressing kept – Lee Valley Hardware – Satin polyurethane finish – www.table.ca

We maintain all the original distressing in the historical, hardship ridden boards we use. Continue reading →

78″ Ontario Barnwood Desk we made for a Woodstock home – 32″ deep – 74″ Return / 24″ deep – 4 Drawers – 1 Door – 31″ height – Left Side Drawers [18″ wide] – Right Side Top Drawer / Bottom Door – Corner Post – Reclaimed Old Growth Hemlock Threshing Floor + Grainery Board Construction – Original edges + distressing maintained – Cast Brass Lee Valley Hardware – Barnboard Grey Option [speciality finish] – Premium epoxy + matte polyurethane finish – www.table.ca

Continue reading →

Ontario Barnwood Island Top + Post we made for a Fort Erie, Ontario home – Hand-Hewn Post Pedestal at End [to extend island size] – Reclaimed Hemlock Threshing Floor Construction – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – www.table.ca

Our reclaimed wood islands tops are durable and good to spill on with our epoxy + polyurethane finishing process. One way you can extend your current island size and add some seating is to add a support post. Check out this recent reclaimed wood island top we made for a Fort Erie customer: Continue reading →

5 1/2′ Reclaimed Ontario Barnwood Table we made for a Dundas, Ontario Home – 40″ wide – U Shaped Matte Black Metal Base – Old Growth Hemlock Threshing Floor Construction – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – Two 18″ Leaves – www.table.ca Continue reading →

Our reclaimed wood coffee tables are custom built, so can be done to any size. For this recent Waterloo project, the custom opted for one of specialty black stain option [as opposed to the typical natural colour]. See project photos below!

Project Summary: 53″ Ontario Barnwood Coffee Table we made for a Waterloo, Ontario home – 30″ deep – 16″ height – Reclaimed Hemlock Threshing Floor Construction – Tapered Windbrace Beam Legs – Original edges & distressing maintained – Black Stain Option – Premium epoxy + satin polyurethane finish – www.table.ca Continue reading →

5.5′ Reclaimed Ontario Barnwood Table we made for a Kitchener, Ontario Home -32″ wide – Harvest Base: Straight 4″x 4″ Windbrace Beam Legs – Hemlock Threshing Floor Construction – Original edges & distressing maintained – Premium epoxy + matte polyurethane finish / www.table.ca

With the traditional harvest table option, we can do straight, turned, tapered or cabriole type legs. For the recent Kitchener reclaimed wood table project, the customer opted for straight. We use the 4″x4″ windbrace beams from the structure of the barn for these: Continue reading →

All our reclaimed wood tables are custom built from scratch, so there are a lot of modification we can make. Check out this recent pedestal table project:

Project Summary: 7′ Ontario Barnwood Table we made for a Kitchener, Ontario home – 41″ wide – Double Pedestal with Rail + Wide Feet Option – Old Growth Hemlock Threshing Floor Construction – Original edges & distressing maintained – Greytone Option – Premium epoxy + matte polyurethane finish – www.table.ca Continue reading →

We custom build reclaimed wood tops for many unique applications. For this project, we made a new top for a cool antique sewing machine base. See pics below!

Project Summary: 38″ 3/4″ x 20″ Reclaimed Ontario Barnwood Top we made for a customer’s antique Singer Sewing Machine base – Hemlock Threshing Floor Construction – Original edges & distressing maintained – Bread Board Ends – Premium epoxy + matte polyurethane finish / www.table.ca Continue reading →

6′ Reclaimed Ontario Barnwood Trestle Table we made for a Green Valley, Ontario Home – 42″ deep – Trestle Base – Old Growth Hemlock Threshing Floor Construction – Original edges & distressing maintained – White painted base option – Premium epoxy + matte polyurethane finish – [Matching] 6′ Bench – [4] Buckhorn Chairs – www.table.ca Continue reading →