Previous Projects

6’ Ontario Barnwood Harvest Table we made for a Dundas, Ontario home – 42” wide – Tapered with a Notch Windbrace Beam Legs – Reclaimed Hemlock Threshing Floor Construction – Original distressing & edges maintained – Premium epoxy + satin polyurethane finish – www.table.ca

Our classic harvest table option has the option of turned, straight, tapered with a notch or cabriole legs. For this Dundas reclaimed wood harvest table project, we did tapered with a notch using old barn windbrace beams. See pics below! Continue reading →

Project details: 8′ Ontario Barnwood Table we made for a Burlington, Ontario home – 42″ wide – Sawbuck base – Original edges & distressing maintained – Old growth Hemlock Threshing Floor 2″ Top – Premium epoxy + satin polyurethane finish – 8′ [matching] bench – 6 Plank Back Chairs / Wormy Maple www.table.ca Continue reading →

Our reclaimed wood boardroom tables are custom built from scratch. To seat two chairs at a table end, consider a wider than standard width. For this St. Jacob’s boardroom table project, the customer opted for a 72″ width to comfortably seat 2 large office chairs at the ends. See pics below:

Project details: 12 ft Ontario Barnwood Boardroom Table we made for a St. Jacobs, Ontario company – 72″ wide – Straight 4″x4″ Windbrace Beam Legs – 2″ Hemlock Threshing Floor Top – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – www.table.ca Continue reading →

As opposed to the hemlock barnwood we use, the old growth Pine is more reddish. The 2 stage epoxy + satin polyurethane finish pulls out the old wood patina. Check out the recent harvest table project we made for a Bolton home:

Project details: 12′ Ontario Barnwood Harvest Table we made for a Bolton, Ontario home – 42″ wide – Original edges & distressing maintained – Old growth Pine Threshing Floor 2″ Top – Straight 4″x4″ Windbrace Beam Legs – Two 15″ Leaf Extensions [making total length 174″ when extended] – Premium epoxy + satin polyurethane finish – www.table.ca Continue reading →

Given the durability/waterproof nature of the epoxy + polyurethane finish, we offer reclaimed wood tables for commercial applications. For this project, we build a custom reclaimed wood cafeteria table for a Port Hope community centre. See pics below!

9′ Ontario barnwood Oval table we made for an Port Hope, Ontario community centre – 48″ wide – Hand-Hewn Beam Pedestals Base – 2″ Hemlock Threshing Floor Top – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – www.table.ca Continue reading →

Some of our customers really want to feel the authentic pioneer distressing in our reclaimed wood table tops. Since epoxy provides a more smooth feel; they’ll typically opt to go with no epoxy filling. While there is a trade-off in terms of practicality [cleaning, durability], this may be worth the cost. Check out this recent Mississauga harvest table project we did with this option:

6′ Reclaimed Wood Harvest Table for a Mississauga, Ontario Home – 40″ wide – Reclaimed Hemlock Threshing Floor Construction- Tapered with a Notch Windbrace Beam Legs – Original Distressing/Character/Edges Maintained – Matte polyurethane finish [no epoxy] – Two 12″ Leaves – 5′ [matching] Bench – www.table.ca Continue reading →

The history of Ontario pioneers is apparent in all our reclaimed wood tables given the amount of authentic character we maintain. Here’s a recent reclaimed wood pedestal table we made for a Cambridge home:

Details: 7′ Reclaimed Wood Pedestal Table we made for a Cambridge, Ontario home – 42″ wide – Beam Posts + Rail Option – Old Growth Hemlock Threshing Floor Construction – Original edges & distressing maintained – Greytone Treatment Option – Premium epoxy + satin polyurethane finish – Two 18″ leaves [making total length 10 ft when extended] – www.table.ca Continue reading →

All our tables can extend up to 18″ at either end. For this recent reclaimed wood trestle table project, we extended a 7 ft to 10 ft. Given the amount of distressing we maintain, centre leaves would not be practical; therefore we only offer them at the ends. See pics below:

Project details: 7′ Ontario barnwood trestle table we made for an Ingersoll, ON company – 48″ wide – 2″ Hemlock Threshing Floor Construction – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – Two 18″ leaf extensions [making total length 10′ when extended] – www.table.ca Continue reading →

The general guideline for seating is 2 ft table length/person based on roughly 19″ chair width. A 5 ft, for example, would seat a max of 6. Check out this recent Ontario barnwood trestle table project we made for a Breslau home:

Specifications: 5′ 2″ Reclaimed Wood Table we made for a Breslau, Ontario home – 42″ wide – Trestle Base – Old Growth Hemlock Threshing Floor Construction – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – www.table.ca Continue reading →

The dark patina of the wood comes out when we apply our clearcoat finish. We took pictures before and after of this reclaimed wood trestle table project. See how the colour comes out:

Details: 10′ Reclaimed Wood Trestle Table we made for a Cambridge, Ontario home – 48″ wide – Hemlock Ontario Barnwood Threshing Floor 2″ Construction – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – www.table.ca Continue reading →